Ham Radio 2000 #2/Ham Radio 2000 - Volume 2.iso/HAMV2/VHF/TACL180/T2L.INI

INI File | 1997-04-22 | 3.0 KB | 162 lines

!
! T2L initialising file
!
! TACLog to log program utility
!
! Sponsored by Charlie, SM4RGD






[Initialize]
!
! The memo field will be inserted into each record.
Memo             =

! Date formats:
!
!  0: YYYYMMDD
!  1: YYYY MM DD
!  2: YYYY.MM.DD
!  3: YYYY/MM/DD
!  4: YYYY-MM-DD
!
!  5: YYMMDD
!  6: YY MM DD
!  7: YY.MM.DD
!  8: YY/MM/DD
!  9: YY-MM-DD
!
! 10: DDMMYYYY
! 11: DD MM YYYY
! 12: DD.MM.YYYY
! 13: DD/MM/YYYY
! 14: DD-MM-YYYY
!
! 15: DDMMYY
! 16: DD MM YY
! 17: DD.MM.YY
! 18: DD/MM/YY
! 19: DD-MM-YY
!
! 20: MMDDYYYY
! 21: MM DD YYYY
! 22: MM.DD.YYYY
! 23: MM/DD/YYYY
! 24: MM-DD-YYYY
!
! 25: MMDDYY
! 26: MM DD YY
! 27: MM.DD.YY
! 28: MM/DD/YY
! 29: MM-DD-YY
!
! 30: DD/MM-YY
! 31: DD/MM-YYYY
!
DateFormat       =18

! 0: HHMM
! 1: HH.MM
! 2: HH:MM
!
TimeFormat       =2

!
! Modes TX/RX
! None of below
ModeCode0        =
! SSB/SSB
ModeCode1        =SSB
! CW/CW
ModeCode2        =CW
! SSB/CW
ModeCode3        =SSB/CW
! CW/SSB
ModeCode4        =CW/SSB
! AM/AM
ModeCode5        =AM
! FM/FM
ModeCode6        =FM
! RTTY/RTTY
ModeCode7        =RTTY
! SSTV/SSTV
ModeCode8        =SSTV
! ATV/ATV
ModeCode9        =ATV

!
! The total length of the output line, trailing spaces will be added if
! the field information is shorter than the total line length.
! If the total length is shorter than the fields the line will be truncated.
! CR and LF is not included in TotalLineLength.
TotalLineLength  =71

[Positions]
!
! Column number where field will be written. Spaces are inserted to pad
! record. If no position is given then the field is not written to output.
OwnCallPos               =
OwnWWLPos                =
OwnOptExchangePos        =
FrequencyPos             =22
ModePos                  =32
DatePos                  =1
TimePos                  =12
CallPos                  =41
RSTSentPos               =54
QSONoSentPos             =
RSTReceivedPos           =58
QSONoReceivedPos         =
OptExchangeReceivedPos   =
WWLReceivedPos           =66
QRBPos                   =
QTFPos                   =
QSLPos                   =
OperatorPos              =
MemoPos                  =

[QSL]
!
! QSL mark to write to output file.
QSLPromised =P
QSLReceived =R
QSLSent     =S
QSLExchanged=X
QSLPromRcvd =\
QSLNone     =

[Frequencies]
!
! Default frequencies for both phone and CW QSOs.
Phone50MHz =    501100
Morse50MHz =    501100
Phone70MHz =    700000
Morse70MHz =    700000
Phone144MHz=   1443000
Morse144MHz=   1440500
Phone220MHz=   2200000
Morse220MHz=   2200000
Phone432MHz=   4322000
Morse432MHz=   4322000
Phone902MHz=   9020000
Morse902MHz=   9020000
Phone1G3Hz =  12962000
Morse1G3Hz =  12962000
Phone2G3Hz =  23202000
Morse2G3Hz =  23202000
Phone3G4Hz =  34002000
Morse3G4Hz =  34002000
Phone5G7Hz =  57002000
Morse5G7Hz =  57002000
Phone10GHz = 103682000
Morse10GHz = 103682000
Phone24GHz = 240002000
Morse24GHz = 240002000
Phone47GHz = 470002000
Morse47GHz = 470002000
Phone76GHz = 760002000
Morse76GHz = 760002000